Outdoor WPC Batten — Light Oak

A pale, blonde-toned batten with soft grain movement. 60 × 40mm, 3600mm long, fully capped, zero maintenance.

Light Oak is the palest timber tone in the range — a warm blonde with fine, low-contrast grain. It reads bright and open, which makes it the pick for coastal builds, courtyards that don't get much sun, and any facade where you want the batten rhythm to register without the wall going heavy. Pairs cleanly with white render, off-form concrete and pale brick.

Key features

• 360° protective capping — fully encapsulated on all four faces and both edges
• Weather and waterproof — won't rot, swell, split or splinter
• UV, sunlight and insect resistant — colour-stable and termite-proof
• No sanding, oiling or lacquering — wash it down and that's the maintenance

About Outdoor WPC Batten

Outdoor WPC Batten is a wood-plastic composite profile engineered for Australian exterior conditions. A core of recycled timber fibre and polymer is co-extruded with a protective cap on all four faces, so there's no exposed core, no seam on the underside, and no weak edge for moisture to find.

That full encapsulation is the whole point. Uncapped composite and natural timber both fail the same way — water and UV get into the fibre, the surface greys, and you're back on a ladder with a sander every couple of summers. Capped WPC doesn't absorb, so it doesn't swell, cup, split or splinter. It won't feed termites and it won't rot.

The structured hollow core keeps weight down to 5kg per 3600mm length — light enough for one person to handle on a ladder — while internal webbing holds the profile rigid across the span. It's a screening and cladding profile rather than a structural member.

Supplied in 3600mm lengths and screw-fixed, the batten suits vertical and horizontal screening, facade cladding, soffits, privacy screens, fencing infill and ceiling battening. Maintenance is a hose-down — no oiling, no staining, no lacquer, no annual re-coat.

Specifications

Applications

Privacy screening · Facade cladding · Soffit and ceiling battening · Fencing infill · Balustrade infill · Feature walls · Carport and pergola screening

Installation and care

Allow for thermal expansion — WPC moves more than timber with temperature change, so leave the specified gap at the end of each run. Pre-drill and screw-fix; don't over-tighten. Cut with a fine-tooth blade. Clean with warm soapy water and a soft brush; avoid solvent-based cleaners. [FIXING CENTRES + EXPANSION GAP + GUIDE LINK — TO CONFIRM]